Best Weight Distribution Hitches & Anti-Sway Bars Australia 2026
Fix sagging, restore steering, and tow safer with the right weight distribution hitch.
10 min read · Updated October 2026
Your caravan's rear sags, your steering feels vague, and your headlights blind oncoming traffic. Sound familiar? A weight distribution hitch (WDH) fixes this by spreading towball weight forward onto the front axle of your tow vehicle and back onto the caravan.
This guide covers what a WDH does and doesn't do, how to tell whether your vehicle can use one, and how to set it up. The hitch we stock is shown below.
Weight distribution hitches in the KamperHub Store
Sold and shipped by us, from Australian warehouses.
See all Towing & Hitch →What a weight distribution hitch actually does
When a heavy towball weight sits on the back of a car, the rear squats and the front lifts. Less weight on the front wheels means lighter steering, less braking grip at the front and headlights aimed too high.
A weight distribution hitch uses spring bars under tension to lever some of that weight forward onto the front axle and back onto the caravan. The car sits closer to level, and steering and braking feel normal again.
It does not add capacity. Your towball, GVM and GCM limits still apply, so check your weights before and after fitting one.
Anti sway bars and weight distribution
An anti sway bar (friction sway control) resists the caravan swinging side to side behind the car. Many weight distribution kits, including the one we stock, come with sway bars in the same kit.
Sway control helps, but it does not fix a badly loaded van. Too little towball weight, or heavy gear behind the caravan axles, is a common cause of sway. Load heavy items low and over the axles first.
Check your vehicle allows a WDH
Some vehicle makers restrict weight distribution hitches, or change the towball rating when one is used. Check your owner's manual or ask the dealer before you buy.
Match the hitch to your loaded towball weight, not the van's empty weight. Weigh the van loaded for a trip so you know the real number.
Setting it up
Measure the height of your front wheel arches unhitched, then again with the van on before the bars are tensioned. Your vehicle maker or the hitch instructions will say how much of that front-end lift to restore: follow them, and do not over-tension the bars.
Re-check the setup whenever you change how the van is loaded, and keep your loaded weights in your free KamperHub garage.
